Water Transfer Sheets - Fall Collection 4

Bring the splendor of autumn to your clay creations with these Water Transfer Sheets. Fall Collection 4 is a collection of 4 sheets measuring 4" x 5.25". There is one image in 4 different sizes.  These sheets are perfect for decorating your polymer clay designs and are easy to use. The sheets feature orange and cream colored pumpkins in 7 different sizes in a repeating pattern.

DIRECTIONS: Start with a white or light colored conditioned slab of polymer clay (I recommend Sculpey Primo or Sculpey Souffle) rolled onto a ceramic tile at the appropriate thickness for your cutters. Place the transfer sheet FACE DOWN on the conditioned slab and burnish (rub) over the top with your hand or a clay roller being careful not to make indentions in the clay. Trim the clay around the edge of the sheet as close as possible without cutting into the sheet. Let the sheet sit on the clay for 10-15 min to allow the ink to set. Take the tile with the clay to a sink and run a small, gentle stream of cold water over the sheet until the paper disintegrates. You can very gently rub your finger over the image while the water is running to ensure the paper fully washes away. Blot very lightly with a paper towel or lint-free cloth and let fully dry before cutting into the image with clay cutters. Bake for recommended time for the clay you are using. You can seal with a polymer clay approved sealant or leave as is. Happy Crafting!!